leave a message
leave a message
If you are interested in our products and want to know more details,please leave a message here,we will reply you as soon as we can.
Submit
Home Videos

Handheld Geomembrane Hot Air Gun - Operation Guide

Handheld Geomembrane Hot Air Gun - Operation Guide

Oct 31, 2026

Geomembrane welding gun is a handheld hot-air welding tool, which can weld geomembrane of different thickness, and are applicable for welding of all thermal-fused material such as PE, PVC, HDPE, PP and so on.

 

The control of welding gun adopts PID automatic thermostatic control with high control accuracy and low temperature fluctuation; speed control adopts PWM automatic voltage and speed regulation circuit, driven by DC servo motor, with great output torque and the operating is stable. It can maintain a constant speed on the condition of creeping, vertical creeping, and variable road load. This welding machine is stable in performance despite of external temperature and voltage variation as well.

 

Proper use of a geomembrane hot air welding gun can reduce installation defects and improve the consistency of field work. This video demonstrates how to use geomembrane welding gun. 

 

 

Operation Instruction

Step 1: Clean the Geomembrane Overlap Area

Remove dust, sand, and other debris that may interfere with the welding process. If water or moisture is present, clean the area and allow it to dry completely. Then, position the two geomembrane sheets so that the overlap is even and properly aligned. Avoid wrinkles, curled edges, excessive tension, and uneven overlaps. The overlap width shall be reserved at 10-15cm.

 

Step 2: Inspect the Equipment

First, check the power cord, plug, and electrical connections for damage, loose connections, or exposed wires. Confirm that the power supply matches the equipment’s rated voltage. Then, inspect the heating system and temperature control dial to ensure that temperature adjustment functions correctly. Check the hot air nozzle for blockages, deformation, or visible damage. Remove dust and residue that could interfere with airflow and heating performance. Finally, examine the housing, handle, and other components for visible damage. If the equipment has a separate blower or adjustable airflow control, verify that the air supply is operating normally.

 

Step 3: Set the Welding Temperature

Generally speaking, 200-230°C may be used as a reference for 1.0-1.5mm HDPE geomembranes, while approximately 230-250°C may be considered for 1.5-2.0mm geomembranes. Start with a lower setting within the equipment’s recommended range and increase it gradually as needed. Insufficient heat may result in poor bonding, while excessive heat can cause over-melting, deformation, or localized burning.

 

Step 4: Perform Trial Welding and Evaluate the Results

First, clean and overlap the test pieces to meet the planned installation procedure. Operate the welding gun using the selected settings, maintaining a steady working rhythm and avoiding prolonged heating in one location. After welding, allow the seam to cool sufficiently before inspecting its bonding quality. Where required by the project specifications, perform peel or shear testing to evaluate seam strength and integrity. If the test reveals insufficient bonding, easy separation, excessive deformation, or localized burning, adjust the temperature, heating time, travel speed, or pressure application method and repeat the trial.

 

Step 5: Weld the Geomembrane

Direct the hot air nozzle toward the overlap area to heat the membrane evenly, then use a suitable pressing tool to form the seam. Maintain a consistent working speed and heating distance. Avoid prolonged heating in one spot, which may cause burning or deformation. Adjust the technique when working around edges, corners, or damaged areas.

 

Step 6: Inspect the Seam and Shut Down

After welding, check the seam for continuity, including bonding, cracks, burns, and weak spots. Repair any defects before continuing. When the work is complete, shut down the welding gun to meet the manufacturer’s instructions and allow it to cool fully before cleaning and storage.

 

FAQ

Q1: What is geomembrane welding gun mainly used for?

Geomembrane welding gun is used for localized hot air welding, edge detailing, corner work, and repairs on compatible thermoplastic liner materials. For long and continuous seams, professional geomembrane welding machine may be more suitable, depending on the material and project requirements.

 

Q2: What temperature should I use for geomembrane welding gun?

Set the welding temperature to meet the geomembrane thickness. For 1.0-1.5mm geomembranes, approxiately 200-230°C is recommended; Welding temperature of 230-250°C is suitable for 1.5-2.0mm HDPE geomembranes. The typical welding speed is 0.5-5m/min, with a slower speed for thicker membranes. During operation, adjust the temperature and speed based on the material properties and trial-welding results to follow the equipment manual and relevant installation guidelines.

 

Q3: Why does a geomembrane seam separate after welding?

Common causes include unsuitable temperature settings, excessive or insufficient travel speed, contamination in the overlap, inadequate pressure, or material deterioration. In addition, unstable equipment performance and changing site conditions may also contribute. 

Request A Quote

If you are interested in our products and want to know more details,please leave a message here,we will reply you as soon as we can.
GET IN TOUCH
Contact Us
Let's have a productive talk.

Through innovative geotechnical materials technologies, we build safer, more durable, and greener infrastructure, and become a trusted global geotechnical solutions partner.

Serving the world

Phone : +86 -18005440164

Phone : +86 -15621270096

Whatsapp : +86 -18005440164

Whatsapp : +86 -15621270096

Email : luna@nuokungeo.com

Email : jone@nuokungeo.com

leave a message

leave a message
If you are interested in our products and want to know more details,please leave a message here,we will reply you as soon as we can.
Submit
Contact Us:luna@nuokungeo.com

Home

Products

whatsApp

contact